Match materials to the liquid

Pipe, valve, gasket and pump materials must suit temperature, acidity, solids and chloride exposure. Do not assume that every stainless-steel grade performs the same in all process conditions.

Protect pump suction conditions

Short, well-supported suction piping reduces cavitation and unstable flow. Avoid unnecessary high points, undersized lines and fittings immediately at the pump inlet.

Support thermal and operating loads

Pipe supports should carry full operating weight without transferring harmful loads to vessel nozzles. Allow for thermal movement and provide access to removable strainers and valves.

Flush and test by system

Clean fabrication debris before connecting sensitive equipment. Conduct documented leak or pressure tests using a method compatible with the equipment and process materials.